模塑科技控股股东减持股份触及1%整数倍并提前终止减持计划，或对股价产生影响
要点摘要
- 控股股东江阴模塑集团有限公司于2026年5月7日通过集中竞价交易方式，减持模塑科技股份9,179,912股，占公司总股本的1.00%。
- 本次减持系根据此前已披露的减持计划进行，原定减持不超过2,754万股（不超过总股本的3%）。
- 此次权益变动触及1%整数倍，模塑集团决定提前终止本次减持计划，实际减持数量未超过原计划。
- 减持后，模塑集团仍为公司第一大股东，持股比例由36.81%降至35.81%。
- 本次减持不会导致公司控制权变更，也不会对公司治理结构和持续经营产生影响。
- 减持价格区间为12.26-13.52元/股，均价为12.945元/股。
- 所有减持股份均为无限售条件股份。
- 公司称本次减持合规，未违反相关法律法规及承诺。
详细内容
江南模塑科技股份有限公司（证券简称：模塑科技，证券代码：000700）发布公告称，公司控股股东江阴模塑集团有限公司于2026年5月7日通过深圳证券交易所集中竞价方式，减持公司股份9,179,912股，占公司总股本的1.00%。本次减持是基于2026年4月4日公司在巨潮资讯网披露的减持计划，原计划在3个月内通过集中竞价和大宗交易合计减持不超过2,754万股（占公司总股本3.00%）。
本次减持后，模塑集团持有公司股份从33,796.4982万股（占总股本36.81%）降至32,878.507万股（占总股本35.81%），但其控股地位未发生变化。此次减持全部为无限售条件股份，减持均价为12.945元/股，价格区间为12.26-13.52元/股，股份来源为协议受让股份。
值得注意的是，本次减持行为触及1%整数倍后，模塑集团决定提前终止本次减持计划，实际减持数量远未达到原计划上限（3%）。公司和控股股东强调本次减持严格按照此前披露的计划进行，未违反承诺和相关法律法规，包括《证券法》《上市公司收购管理办法》《深圳证券交易所股票上市规则》等。
公司表示，本次减持不会导致公司控制权发生变化，也不会对公司治理结构及持续经营造成任何影响。减持期间，未出现违反《证券法》及相关规定的情况，也不存在股份被限制表决权的情形。
对股东的重要提示及潜在影响
- 股份减持通常被市场解读为控股股东对公司未来信心的信号，或对公司股价产生短期波动影响。
- 本次减持后，控股股东持股比例仍高，控制权未变；但减持行为及提前终止计划，投资者需关注其资金需求或公司后续发展策略。
- 减持价格区间与市场价接近，未出现大幅折价，显示控股股东减持相对理性。
- 提前终止减持计划，有助于稳定市场预期，减少未来减持压力。
结论
本次控股股东的减持行为虽符合法律法规且提前终止，显示管理层对市场稳定的重视，但减持本身及控股比例下降仍可能对公司股价短期内产生一定影响。投资者应密切关注公司后续公告及控股股东动向。
免责声明
本文仅为信息披露解读，不构成任何投资建议。投资有风险，入市需谨慎。
—
English Version
Mold-Tech: Controlling Shareholder Reduces Stake by 1% and Terminates Reduction Plan Early – Potential Market Impact
Key Highlights
- Controlling shareholder Jiangyin Mold Group Co., Ltd. reduced its stake in Mold-Tech by 9,179,912 shares (1.00% of the total share capital) via block trading on May 7, 2026.
- The reduction was part of a previously announced plan to sell up to 27.54 million shares (no more than 3% of total share capital) within three months.
- Upon reaching the 1% threshold, the group decided to terminate the reduction plan early; the actual reduction is well below the original plan.
- After the reduction, Mold Group remains the largest shareholder, with its stake decreasing from 36.81% to 35.81%.
- The reduction will not result in a change of control or affect corporate governance or ongoing operations.
- Reduction price range: RMB 12.26-13.52 per share; average price: RMB 12.945 per share.
- All reduced shares were unrestricted shares.
- The company confirms the reduction was compliant with regulations and prior commitments.
Details
Jiangnan Mold Technology Co., Ltd. (Mold-Tech, 000700.SZ) announced that controlling shareholder Jiangyin Mold Group Co., Ltd. sold 9,179,912 shares (1.00% of total share capital) via block trading on May 7, 2026. This sale was in line with the company’s April 4, 2026, pre-disclosure, which planned for up to 27.54 million shares (3% of total share capital) to be sold by the controlling shareholder within three months via block or bulk trading.
After this reduction, Mold Group’s stake dropped from 337.965 million shares (36.81% of total) to 328.785 million shares (35.81%), retaining its position as the largest shareholder. The shares sold were all unrestricted, with an average price of RMB 12.945 per share (price range: RMB 12.26-13.52).
Notably, upon reaching the 1% threshold, Mold Group decided to terminate the reduction plan early. The actual number of shares sold is well below the planned maximum. The company and controlling shareholder emphasized strict adherence to the previously disclosed plan and compliance with all relevant laws, including the Securities Law and Shenzhen Stock Exchange rules.
The company stated that the reduction would not result in a change of control, nor would it affect corporate governance or ongoing operations. There were no violations of securities laws, and no shares are restricted in voting rights.
Important Information for Shareholders & Potential Market Impact
- Share reductions by controlling shareholders are often interpreted by markets as a signal of their confidence in the company’s future, potentially triggering short-term share price volatility.
- Despite the reduction, the controlling shareholder’s stake remains high and control is unchanged; however, investors should note possible capital needs or strategy shifts.
- The reduction price is close to market price, with no significant discount, indicating a rational approach.
- Early termination of the reduction plan may help stabilize market expectations and reduce future selling pressure.
Conclusion
While the reduction is compliant and the plan is terminated early, both the sale and the decrease in the controlling stake may have some short-term impact on the share price. Investors should monitor further company announcements and developments closely.
Disclaimer
This article is for informational purposes only and does not constitute investment advice. Investing involves risks. Please exercise caution.
